3’ PCV, ABS, CPVB (76mm) vent-the water heater can be vented horizontally or vertically with 3’ (76mm) PVC, AVS & CPVC for lengths up to 30 feet (9.1m) with (3) 90° elbows. (45 equivalent feet) (13.7m)
4’ PVC, ABS & CPVC (102mm) vent the water heater can be vented horizontally or vertically with 4’ (102mm) PVC, ABS & CPVC for lengths up to 60 feet (18m) with (3) 90° elbows. (75 equivalent feet) (23m)
Vitraglas lining Brad ford White water heater tanks are protected from the corrosive effects of hot water by exclusive ceramic porcelain like coating. The Bradford White high silica Vitraglas lining provides a tough interior surface or our hot water tanks.
Side connections for space heating
Protective magnesium rod provides added protection against corrosion for long trouble free service.
Factory installed Hydrojet Total Performance System cold inlet sediment reducing device. Helps prevent sediment build up in tank. Increase first hour delivery of hot water white minimizing temperature build up at top of tank.
Heat Traps factory installed minimize heat los through piping.
Water Connections NPT factory installed true dielectric fittings Extends water heater life and eases installation (MIITW75T has factory installed dielectric waterway fittings).
2’ Non CFC form insulation (65 gallon model has 1” Non CFC form) covers the sides and top of tank to save energy by retarding loss of heat. Also increases jacket rigidity.
Fully automatic controls fast acting surface mount thermostat for automatic temperature control. Built in energy cut off switch prevents abnormally high water temperatures for extra safety, Combination gas valve electronic module has built in gas pressure regulation and electronic circuit controls. Ignition system operates off of 24 volts.
Brass drain valve
T&P relief valve included all sizes come standard with special tapping on side of tank.
Flue baffle designed to maximize the amount of heat absorbed in the lower portion of tank. Reduces air movement in the heater during standby periods to retard heat loss up the flue
Six or ten years limited warranty on steel tank heavy gauge steel automatically formed, rolled and welded to assure a continue seam for gas lining.
Six year limited warranty on parts.
Design certified by CSA international (formerly AGA and CGA).
|